Applied logo2

Top Banner 728x90 2 2 19

Trucking Applications

Energy Release Products Protect and Extend the Life of Your Truck

Industrial and commercial equipment sit idle for long periods of time...Mother Nature takes its toll on them. The combustion process in an engine forms acids which are highly corrosive when the vapors condense. These acids collect in the upper cylinder areas where their temperature is raised above their dew point. The acids condense and etch the cylinder walls and piston rings, which accounts for engine wear. Cold starts are also harmful to the internal engine components because abrasion occurs. Moisture build- up (in the lubricated components of the equipment) causes corrosion and component failure.

Energy Release is activated by heat and pressure to protect against wear created by the moving parts in your engine and equip- ment. The metal surfaces treated with ER are resistant to abrasion, oxidation, rust and corrosion for year-around protection. Energy Release has a definite residual effect on treated surfaces, even if the surface is dry after treatment.

Energy Release (ER) is the Only Oil Additive That Can Be Used in Every Lubricated System of Your Truck


Energy Release Antifriction Metal Conditioner


  • Crankcase
  • Manual Transmission
  • Automatic Transmission
  • Differentials/Transfer case
  • Power Steering
  • Wheel Bearing Hubs
  • Hydraulic Gear Boxes
  • Air Conditioning Units


We recommend using Energy Release
to all trucking companies who are serious
about cutting engine repair and per mile
maintenance costs.


Energy Release Has A Significant Effect On Diesel Engines

Diesel engines provide power to the world. They provide power to trucks, ships and boats, construction and mining machines and much more...they also take a beating. Engines are a significant investment. Engine lubrication is perhaps the single most important element of a good maintenance program. Engine oil lubricates moving parts; it provides corrosion protection; it absorbs and neutral- izes contaminant; it serves as a coolant; and it is a sealant. Fuel efficiency is also a major consideration, especially with the energy conservation of the world's petroleum supplies (fuel savings is only a small portion of the true value of using Energy Release).

Energy Release has been tested and proven for over 20 years. Adding Energy Release to Diesel Engines helps eliminate oil related catastrophic failures caused by lubrication break down.


721pxCumminsEngineEngines are a significant investment. Adding Energy Release helps eliminate oil related catastrophic failures caused by lubrication break down. ER also extends the life of a Turbocharger.


When Friction and Wear are Reduced in A Diesel Engine 
any of the Following May Occur:


  • Increased Performance
  • Improved Combustion Efficiency

  • Increased Fuel Economy

  • Reduced Operating Temperatures

  • Quieter Operation

  • Reduced Oil Consumption

  • Extended Oil Life

  • Easier Cold Starts

  • Prolonged Vehicle Life


Energy Release Increases Efficiency in Hydraulic Drive Systems

When a hydraulic pump moves fluid, the friction between the turbine vanes and the housing in a Rotary Vane Pump and the meshing of the gear teeth in a Gear Pump, translates into additional torque needed to operate the pump, particularly at start-up. It takes extra energy to get the pump started and you can’t run it at its optimum (high speed) efficiency because it would wear out more quickly. Treating the pump with Energy Release treats the turbine blades and gear teeth to reduce friction and increase wear resistance, which has a significant effect in boosting the efficiency of all kinds of industrial and commercial pumps.

Energy Release Hydraulic Volumetric and Mechanical Efficiency Test

800px-PTO gearboxA hydraulic Power Take-off (PTO) mounted on a truck gearbox.Energy Release Hydraulic Test

  • Hydraulics: Tested by Fluid Engineering Services, Stillwater, Oklahoma, for both volumetric and mechanical efficiency.

  • Results: ER attained an incredible 8% increase in efficiency in initial and follow-up studies when added to a hydraulic test system working at pres- sures over 400 PSI; the maximum increase of efficiency previously tested at the facility had been only .5%.







Energy Release Treats All Kinds of Industrial and Commercial Pumps

Fire TruckEnergy Release is very effective in treating the hydraulic pumps on a Fire Truck. Operating the Mechanical Arm On A Bucket TruckTypical PTO/Hydraulic Pump Applications Include:

  • Running a Water Pump on a Fire Engine or Water Truck

  • Running a Truck Mounted Hot Water Extraction Machine for Carpet Cleaning

  • Powering A Blower System Used to Move Dry Materials Such as Cement

  • Raising a Dump Truck Bed

  • Operating A Winch On A Tow Truck

  • Operating The Compactor On A Garbage Truck

  • Operating A Hiab/Grapple Truck




Energy Release Has Been Tested and Proven for Over 20 Years


Bucket TruckBucket Truck Grapple truckGrapple truck Ready Mix Concrete TruckReady Mix Concrete Truck


Energy Release High-Temperature Synthetic G-200 Grease


G-200 High-Temperature Synthetic Grease should be used
where severe shock loads are placed on bearings. Combined
with ER, G-200 offers high film strength, resistance to oxidation, rust and corrosion.

  • Fifth Wheel Plates

  • King Pins

  • Rockwell U-joints

  • Wheel Bearings

  • Hinge Pins

  • Fan Hubs

  • Conveyor Bearings

Fifth WheelGrease works great for severe applications such as fifth wheel plates, kingpins, backhoe hinge pins.



G-200 High-Temperature Grease Benefits


G200TubSpicer Universal Joint Division of Dana Corporation has approved Energy Release G-200 High- Temperature Grease as having met 2006-J specification for High-Temperature Lubricant.
  • Heat Resistant, Melting-point above 550° F     

  • Resistant to Oxidation, Rust and Corrosion

  • Adhesive; Clings to Moving Parts

  • Distinct Color for Easy Identification

  • High Film Strength

  • Resists Severe Loads

  • Non-melting

  • Resists Water

536px-Tapered-roller-bearing din720 exER reduces friction in Timken Tapered Roller Bearings for efficiency, to reduce wear and to facilitate extended use at high speeds.



Energy Release Gear & Chain Clear Grease



ER Gear & Chain Clear grease combines a high quality soluble grease with ER to form a protective barrier against moisture and extreme temperature swings. It sprays on thin to penetrate the link pins and tacks up in seconds for superior adherence. ER Gear & Chain Clear Grease helps to reduce overall wear and prevents rust and corrosion form forming on exposed surfaces. It is recommended for all types of gears, chains and hinge pins.Heat Resistant, Melting-point above 550° F     


    • Sprays On Thin To Penetrate Link Pins and Bushings

    • Tacks Up in Seconds For Superior Adherence

    • Combined With ER, Prevents Rust and Corrosion

    • Open Gears and Chain

    • Conveyor Chain

    • Hinge Pins

IMG 0068 goodEnergy Release Gear & Chain Clear Grease is very effective in treating Live Bottom Chain; it sprays on thin to penetrate the link pins and tacks up in seconds for superior adherence, which maximizes the service life of a chain drive or conveyor. Tip: Clean the Chain Using Compressed Air, Then Apply Energy Release Gear & Chain Clear Grease.






Energy Release Penetrating Lube


ER Multipurpose Penetrating Lube incorporates the metal conditioning technology of ER in a convenient spray form. It works well in high heat applications where ordinary lubricants typically evaporate or burn away. ER Multipurpose Penetrating Lube guards against rust on exposed surfaces, frees bolts and fitting frozen by rust or corrosion and is an excellent antioxidant.

  • Frees Bolts and Fittings Frozen by Rust or Corrosion
  • Excellent Antioxidant
rusty bolt 01 0510-lgThe exceptional effect of ER Penetrating Lube allows it to work directly into the rust by capillary action. The rusted bolt assembly can be easily dismantled after allowing 1-2 minutes penetration time.


Energy Release Cutting and Tapping Fluid



ER Cutting and Tapping Fluid is a superior cutting formula containing ER which can be applied with ease. ER Cutting and Tapping Fluid incorpo- rates ER to help tools cut through the hardest metals without distortion and tool wear. The fluid reduces heat and clings to tool surfaces providing superior protection to cutters, drills, taps, reamers and punches. ER Cutting and Tapping Fluid is recommended for use on stainless steel, high nickel alloys and exotic alloys such as Titanium, Hastelloy X, Inconel and Askoloy.

  • Incorporates ER to Cut Through Hard Metals
  • Provides Superior Protection
  • Protects Cutters, Drills, Taps, Reamer and Punches
  • Extends Tool Life
hss TapsToday’s machine shops are diverse and specialized. ER Cutting & Tapping Fluid is very effective in cutting through the hardest metals without distortion and tool wear.





Energy Release Citrus Engine Degreaser Plus



ER Citrus Engine Degreaser Plus is a versatile cleaner/ degreaser that can be used as a tough engine degreaser or a gentle all purpose cleaner. The citrus-based formula is safe to use on auto parts, tools, machinery and concrete as well as stainless steel and plastic. The product is free of petroleum distillates and is environmentally friendly. This product rinses completely with water leaving no resi- due.

  • Gentle All Purpose Cleaner
  • Citrus-based Formula
  • Safe Tools, Concrete, Stainless Steel and Plastics
  • Free of Petroleum Distillates
  • Environmentally Friendly
240px-OrangeBloss wbEnergy Release Citrus Degreaser Plus is made with a natural citrus solvent that cuts through the toughest grease, dirt and grime. ER Citrus Degreaser is great for cleaning in the home, garage, shop and office.



Fuel System Cleaner

Rapid Cleanup Diesel and Gasoline Supplements

Energy Release Fuel Conditioners and Cleaners rapidly treat engine deposits if fuel metering system components (port and throttle body fuel in‐ jectors or carburetor idle air bleeds and throttle bodies), in the intake manifold, ports and values. Removal of these intake system deposits can improve drivability, increase fuel economy, restore power and reduce exhaust emissions.

Energy Releases Fuel System Cleaners can also reduce engine knock and run‐on by removing combustion chamber deposits and lowering engine octane requirements. Benefits will vary with engine design and operating severity.

Energy Release Diesel Fuel System Conditioner


DieselFuelSystemCleaner ER Diesel Fuel System Conditioner removes harmful
deposits left as a combustion by-product. One bottle
treats up to100 gallon and works to clean dirty injectors,
prevents corrosion and improves fuel lubricity.
  • Cleans Dirty Injectors
  • Passes Cummins L-10 Injector Test
  • Controls Water Pickup
  • Improves Fuel Lubricity
  • Removes Deposits and Prevents Corrosion
  • One 16 fl. oz. Bottle Treats Up to 100 Gallons of Fuel


diesel-fuelThe quality of available diesel fuels varies considerably, depending on the base ingredient in the diesel. Poor quality diesel can decrease fuel efficiency, increase pollution and damage engines. ER Diesel Fuel System Conditioner cleans and maintains your fuel system.




Energy Release Fuel Injector Cleaner



ER Fuel Injector Cleaner removes and prevents
fuel system deposit buildup, keeps fuel injectors
and carbure- tor clean and restores lost fuel efficiency.

  • Cleans Fuel Injectors & Carburetors
  • Increases Performance
  • Smoothes Rough Idle
  • Keeps Injectors Clean
  • One 16 fl. oz. Bottle Treats 16 Gallons of Fuel
800px-Injector3800px-InjecFuel Injector Cleaner is formulated to maintain and control deposits, gum and varnish in the entire fuel system.tor3



Energy Release Complete Fuel System Cleaner



ER Complete Fuel System Cleaner is a highly
concentrat-ed deposit control system developed
for today’s high per- formance gasoline engines.
It cleans harmful deposits, reduces emissions and
restores power and performance.

  • Removes Combustion, Injector, & Valve Deposits
  • Cleans Carburetors
  • Restores Performance
  • Reduces Emissions
  • One 16 fl. oz. Bottle Treats 16 Gallons of Gasoline
combustionComplete Fuel System Cleaner is highly concentrated to remove intake valve combustion chamber deposits.